The cause of the issue within this Canon Inkjet printer is quite diverse, but the primary cause is error code B200 is the most common. The error B200 may indicate a range of things however the main reason is due to the print head being overheated. Other than that the problems generally have a connection to the empty waste ink tanks and a full waste ink pad, and a different area in the printing head.
For your canon mx922 b200 error, Canon technicians urge users to try a few common fixes to fix this issue. The suggestion is to shut off of the printer, and then switch it ON. We have discovered a few other solutions that are more robust and require working in conjunction with the heads of the printer.
Infection B200 Reasons:
The reason the printer has a problem and what can be done to fix this printer error?
A possible reason is:
The error on the printer resulted in a paper being printed, but the ink was empty, in the event that the cartridge is completely empty.
According to Canon the issue could also be because of cartridges that are not from the country which the printer cannot take on the task. Checking the printing heads and cleaning them could assist in fixing the issue. However, it is essential to keep in mind the alternate only in cases where the printer has not been covered by a guarantee, as the warranty is not valid because you could cause damage to the printhead.
Option 1:
Turn off the printhead.
Then, open the cover of the printer and reveal the cartridges for ink.
Get rid of the printhead on the printer. Be careful.
Clean the Printhead Alongside all the Ink Cartridges.
Clean the touchpads inside the printer with an electronic touch cleaner or great pen eraser.
Option 2:
Turn off power to this Printer.
You must wait for the print bin to start moving towards the left side and let it move past half way.
The print carriage is in front of the hand (but after having crossed the entire length) closes the cover.
I turned the printer around again.
Eliminate cartridges for ink.
Cleanse the printhead’s back (digital pins) using alcohol (isopropyl cleaning alcohol if it is feasible).
Make sure the pins are free of dirt.
Shut down the printer (don’t close it!) By plugging the power cable off (don’t make use of the an power switch).
Clean electronics pins inside the printer (the location where you put in the printhead).
Make sure it’s 100% washed.
Then turn the printer off normally.
Verify that the printer is operating normally (no errors ).
Option 3:
Turn off your printer.
Remove the printer from the power supply.
The cap on the printer should be opened and remove the cartridges with colors.
Eliminate the sleds in the capsules in which it was previously placed.
Rinse the capsules in water and Be cautious. To get the most benefits washing it, use the solvent isopropanol (there is in your local drugstore ) to ensure that the printhead doesn’t get blocked by lime.
Make sure that the gold contacts aren’t wet, or you could damage your print head.
Dry everything carefully, ensure that no traces of water is in the printer.
Install the capsules and carriages back in the initial position.
Turn off the printer once more.
If the idea of” Error B200″ is encountered once more, the printer must to be shut off once again. In addition, the flap needs be opened prior to switching it on. After switching on again with the other one open the printer will then run self-tests: The issue shouldn’t occur to repeat more often, and it will function and the issue is solved.
Option 4:
Press the entire print head mechanics towards the center.
When the printer is ready then plug in the power, and then switch it on.
If the printhead is continues to move and is moving towards the left close the cover.
Then wait until it boots up.
If you encounter an issue following the steps above, join the Canon Support group, and get the problem resolved within a short time. Contact Canon’s Technical Support Amount that will be open 24 hours a day to help you. We’re reliable and flexible service providers that provide exceptional Canon service for all your Canon issues. Our trained technicians are able to resolve this issue and solve various types of Canon printer problems in shorter time. So, call us now to speak with our experts to get instant online support. We offer Canon printer services in various ways, including Online Live Chat, Email as well as Telephone assistance.