The Netgear WiFi extender is the most reliable & best choice to exaggerate the Wi-Fi range of your prevailing router. It completely covers the distance between your Wi-Fi dead zone & interrupts network connectivity. With this range extender, the Wi-Fi dead zone is completely covered and also eliminated. As well, the Wi-Fi speed of the Netgear WiFi extender device is superior and very high. Through the Wi-Fi speed of the Netgear extender, you can readily boost the Wi-Fi coverage. You cannot take the experience of whole-home coverage with a WiFi router. But by installing the extender, you can enjoy the whole-home coverage and also take the experience. Along with this, this extender also has LED lights. Which is more useful and helpful to find the accurate location to install the extender.
In addition, the Netgear Wi-Fi range extender handles wired networking devices because the LAN ports are built-in. On the bottom side of the extender, the two LAN ports are built-in. If you connect your wireless device to the extender, then select netgear_ext name. This is the default name of the Netgear extender. Through this name, your device quickly connects it.
Why Netgear WiFi Extender Device Light Not On?
On the front side of the Netgear WiFi extender, you will find LED lights. This extender has power, WPS, router, and a device LED light. This LED light flashes in many colors. Through these colors, you get to know the connection and signals. But sometimes this LED light is not even on. If you are using Netgear Extender but the device light does not turn on, you will not be able to enjoy WiFi connectivity. Because the device light indicates that your extender is turned on.
There can be many reasons for no power light. Let us see which is the reason why the light of the extender device does not turn on.
Reasons: Netgear WiFi Extender Device Light Not On
Before understanding the solutions, we would advise you to understand the reason due to which the light does not turn on. Because the reasons help a lot in solving the problem.
- You may not have plugged the extender into the power supply properly
- The power button of the Netgear extender is tur off
- No power in the wall power supply
- In the wired connection, maybe the wired is faulty and broken
- You may have made the connection wrong
4 fixes: Netgear WiFi Extender Device Light Not On
If the device light of the Netgear Extender is not on then you can follow the below 4 steps. Because in below 4 steps it is told how to solve the problem in future.
Verify the connection
If the Netgear Extender device’s light is not turning on then you should check the connection. Because many times you make a wrong connection, due to which the light of the device does not turn on. If the connection between your router and the range extender is wrong then you should correct it. To make the connection, use the network cable instead of the WPS button. Because a network connection is better than a wireless connection. You can simply make the connection, by plugging a network cable into the port of the router and extender. After, reliably take the robust network connectivity in the entire home.
Using other power supply
Sometimes the power supply into which your Netgear extender is plugged in does not have power. If there is no power in the power supply, then your extender light will not turn on. So to solve this problem, we would urge you to use some other power supply. But before plugging the Netgear WiFi range extender into the power supply, make sure that it has proper power. You can plug the extender only if it has power.
Check the power button & turn it ON
Very often it happens that the power button of the extender is turned off. If the power button of the extender is turned off, then the light of the extender will not turn on. For this, you have to go to the extender and look at the back. Because the power button is at the back. If this button is turned off then you have to turn it on. Now the LED light of your extender will be turned on.
Reset the Netgear WiFi extender
The last solution is to reset the extender. Resetting the range extender probably solves many problems like the wifi extender randomly disconnects, not showing up, & many more.
To reset the extender, simply use the small object. This small object is to be pressed on the extender’s reset button. Afterward, the extender will be rebooted & the problem will fix it.
Fritz!Box Connection Problems! What Are Common Issues & Solutions?
