Through the years the printing industry has experienced massive growth which helped make our daily work effortless and efficient. There are many printing equipments available on the market that has a variety of technical specifications. In spite of that, the Canon Pixma Mx 922 printer is among them. This
Canon printers are among the top in their class and are design to produce decent prints. Sometimes, however, technology can be odd, reducing the overall processing process, as well as the error handling methods. Error code B200 in Canon printers may affect the speed of printing overall. This error code is connected to the ink cartridge region of the printer’s system.
This blog post thoroughly explained the process of error detection to resolve this canon mx922 support code b200.
What exactly is the error code b200?
Typically an error code of B200 on the Canon Pixma MX922 printer is a sign of a defective print head.
What are the main reasons for having the error b200 on your Canon Pixma Mx 922 Printer?
A error code of 200 that was display in Canon printer models may affect the speed of printing and also the processing. This is due to several crucial reasons which are listed below.
- Drying up cartridge
- Replica ink cartridge
- The cartridges are jam
- Waste tank filled
Dryed up cartridge
If you don’t use the copier for a long period of time and then you make use of it again the error canon b200 could happen. The Canon MX922 printer can accept two kinds of cartridges that are 2 and 4+. Both of them will run dry if not used for a prolonged period of time.
Replica ink cartridge
Sometimes, ink that is not of high-quality use in the system could cause a major change in the system. When you put it in the system, it can ruin the experience of printing. It is recommended you utilize the original ink from Canon printer.
If you are publishing more than one document at a time for a prolonged period You may notice Canon printer error b200 blinking on the screen. The printer’s head heats up due to being overfilled with instructions, and then the printer stops connecting to the cartridge. The printing ceases to function and shows the Canon MX922 support code b200.
It was discover that in some instances jamming the cartridges of ink area or section of the printer could cause several serious issues. The error caused paper to drip. It is recommend you clean and inspect the cartridge’s section thoroughly.
Tank filled with waste
Canon MX922 features an internal waste ink container. When cleaning the tank it stores and collects the waste ink. Canon MX922 error code b200 can occur if the tank is completed. To fix the issue it is necessary to inspect and clean the tank.
How can I solve the Canon B200 Error Code?
This is the full troubleshooting procedure to fix the error code b200 in Canon printer models.
The printer should be restart.
One of the most basic ways to get rid of the error for the Canon printer is to reboot the machine. Just restart it again and check if the support code mx922 B200 is gone.
It is essential to follow these steps to complete the task:
- Reconfigure all the cartridges. To rebuild the cartridge linkage with the printer, erase all of the old cartridges and change them to a fresh cartridge, then reinstall them.
Take a look at the cartridge for your printer for more information about the issue and solutions.
Clean and reinstall print head
- Separate the printer head from the printer and clean those gold connectors on its backside gently. After everything is cleaned ensure that the ribbon cable is properly connected to the printer head prior to reinstalling it.
- After you’ve removed the head of your printer after that, rinse it under hot water to wash out any ink that remains before replacing it.
Reload the driver
At the final point, corrupted driver software for the printer within the system could affect the performance of the printer system. The only way to repair the issue with the printer is to load the driver on the system.
Press the printer driver installation to obtain the pertinent details.
They can also be correct however you must use extreme caution when you decide to clean the head of the printer. It isn’t recommended to do this unless are familiar with the device as otherwise, you could end up damaging it. Start by trying other methods before you settle on this one. Contact us for more assistance.